High Pole Striker Mount And Fiberglass Striker Rods
The High Pole Striker Set allows you to attach fiberglass striker rods to the top mast of your high pole. Just slip the 3/4″ open end over and onto your high pole and fasten using the lower two set screws (Be sure no to over-tighten) using the supplied hex wrench. Now the fiberglass Striker™ rod with a 6″ height marking can be inserted in to the Striker™ and set to the height desired using the upper two set screw. You can adjust the flex of the rod by sliding it in for more rigidity or extended out for additional flex.
BE SURE NOT TO OVER-TIGHTEN THE SET SCREWS AND DAMAGE THE POLE SECTION.
Made by Wonder Pole for the pilot car industry. Trust Wonder Pole® to continue to improve and introduce high pole products to serve the high load escort industry.